Coupling and uncoupling
44
7.4 Top link
7.4.1 Mounting position
The top link (1) can be mounted in several
positions on the three-point tower (2). A
total of four mounting positions are pro-
vided. Select a lower mounting position for
the top link (1)
to improve the infeed of the device
to relieve the load on the front axle of the
tractor
to increase the roller pressure
to reduce the lifting force requirement
Select a higher mounting position for the top link (1)
to increase the lifting height
to reduce the slippage
to reduce the roller pressure
2 1
To Next Page
Loading...
