LEMKEN Karat 9 - Hydraulic System; Transport; Work Assignment; Coupling and Uncoupling

Preparation of the Tractor
36
6.7 Hydraulic system
6.7.1 Transport
CAUTION
Lowering the three-point linkage
The device may be damaged if the three-point linkage of the trac-
tor is lowered due to an incorrect setting or operation.
 For transport always switch the hydraulic system of the tractor
to "position control".
See operating instructions of the tractor manufacturer.
6.7.2 Work assignment
For use on the land switch the hydraulic system of the tractor to float position or
mixed control.
See operating instructions of the tractor manufacturer.
6.7.3 Coupling and uncoupling
CAUTION
Lowering or raising the three-point linkage
If the three-point linkage moves uncontrollably due to an incorrect
setting or operation, the operator may be injured.
 To couple or uncouple the device, always switch the tractor hy-
draulics to position control.