Contents
4
3.9 Operation on public highways ...................................................................................21
3.9.1 Lighting system and identification ............................................................................21
3.9.2 Requirements of the tractor...................................................................................... 21
3.9.3 Axle loads.................................................................................................................22
3.9.4 Check before departure ...........................................................................................23
3.9.5 Correct behaviour in road traffic............................................................................... 23
3.10 Obligation of the operator ..........................................................................................24
3.11 Operating the device safely........................................................................................25
3.11.1 General information.............................................................................................. 25
3.11.2 Personnel selection and qualifications..................................................................26
4 Handing over the device.........................................................................................27
5 Design and function................................................................................................28
5.1 Overview ......................................................................................................................28
5.2 Function.......................................................................................................................29
5.2.1 Three-point headstock .............................................................................................29
5.3 Frame ...........................................................................................................................29
5.4 Tines.............................................................................................................................30
5.4.1 Working depth adjustment of the tines.....................................................................30
5.4.2 Automatic overload safety device for the tines.........................................................30
5.5 Hollow discs ................................................................................................................31
5.6 Edge discs ...................................................................................................................31
5.7 Rollers..........................................................................................................................31
6 Preparation of the Tractor......................................................................................32
6.1 Tyres.............................................................................................................................32
6.2 Lift Rods.......................................................................................................................32
6.3 Check Chains or Sway Blocks of the Three Point Linkage ..................................... 32
6.4 Required power sources.............................................................................................32
6.5 Required hydraulic equipment...................................................................................33
6.6 Three-point linkage .....................................................................................................34
6.7 Hydraulic system.........................................................................................................36
To Next Page
Loading...
