To Next Page

To Previous Page

Stand-by Fan Speed Settings

Set the indoor unit fan operation when the indoor unit setpoint is satised.

1. Tap the Indoor Fan Settings button to enter the stand-by fan speed settings interface.

2. Slide the button below Cooling and select the fan status setting when the cooling setpoint is

satised.

3. Slide the button below Heating and select the fan status setting when the heating setpoint is

satised.

Figure 99. Indoor Fan Settings

General1
Requirements1
Shipping and Packing List1
Tools Needed1
Controller Placement1
Table of Contents2
Installation4
- Connecting to One Indoor Unit5
- Connecting to Multiple Indoor Units6
- Mounting the Controller7
Home Screen Display10
Operation14
- On/Off14
- Error Code Display15
Mode Settings16
- Cooling Mode Operation16
- Heating Mode Operation17
- Auto Mode Operation18
- Dry Mode Operation20
- Fan-Only Operation21
- Temperature Setpoint22
- Space Temperature and Space Humidity Display23
- Temperature Unit Switching (ºF/ºC)24
- Fan Speed25
- Swing26
- Weekly Schedule Settings Quick Access27
- Override Settings28
Schedule Management29
- Setup Schedule Templates31
- Paste a Schedule32
- Copy and Paste a Schedule Template32
- Copy a Schedule32
- Rename a Schedule Template34
- Delete a Schedule Template35
- Add a Daily Schedule Action36
- Delete a Daily Schedule Action37
- Rename a Daily Schedule Action37
- Edit a Daily Schedule Action38
- Setup a Weekly Schedule39
- Tap the Add Button40
- Rename a Weekly Schedule41
- Delete a Weekly Schedule42
- Modify a Weekly Schedule43
- Select the Weekly Schedule to Use44
- Setup Holiday and Special Day Schedules45
- Add a Holiday and Special Day Schedule46
- Rename a Holiday and Special Day Schedules47
- Modify a Holiday and Special Day Schedules48
- Delete a Holiday and Special Day Schedules49
- Override Scheduled Settings50
General Settings Configuration52
- Time Format Settings53
- Time Settings53
- Theme Settings54
- Brightness Settings54
- Controller Touch Tone (Sound) Settings55
- Standby Interface (Screen Saver) Settings56
- Standby (Screen Saver) Duration Settings57
Swing Angle Settings58
Daylight Savings Time Settings58
Room Temperature and Humidity Display Settings61
Contractor Information Input62
Service Menu63
- Access Service Menu63
- Change Password64
Master / Sub Wired Controller Settings65
Master / Sub Wired Controller Operation66
Indoor Unit Address Settings68
Indoor Unit Display Board & Buzzer (Sound) Settings69
Room Temperature Sensor Settings70
Auto Mode Settings72
Draft (Cold Blow) Prevention Settings74
Stand-By Fan Speed Settings75
Indoor Unit Static Pressure Settings76
Occupancy Sensor Function Settings77
Dry Mode Settings78
Auxiliary / Alternate Heat Settings79
Setpoint Limit Settings81
Locking Function Settings82
Advanced Information83
- Device Operation Information Query84
- Device Operation Error History Query86
- HHE Dry Contact Relay Interface Status Query90
- Controller Information91
Firmware and Setting Information92
- Software Version93
- Controller Software Update94
- Indoor Unit Software Update96
- Setting Parameters Backup99
- Setting Parameters Import100
- Reset Settings101
Help102
- Get On-Screen Help102

Brand	Lennox
Model	V0STAT51P-3
Category	Controller
Language	English

Lennox V0STAT51P-3 User Manual

Table of Contents

Questions and Answers:

Lennox V0STAT51P-3 Specifications

Related product manuals