To Next Page

To Previous Page

4. Tap YES to upgrade the controller software. Wait for about 10 seconds. Then the Update

success pop-up window will display. Or, tap NO to return to the previous screen.

Figure 119. Controller Software Update Success!

5. After the controller software upgrade, the Reboot the system to nish the update prompt box

will display. Tap YES to restart the system, or tap NO to return to the previous interface.

Figure 120. Reboot After Controller Software Update

General1
Requirements1
Shipping and Packing List1
Tools Needed1
Controller Placement1
Table of Contents2
Installation4
- Connecting to One Indoor Unit5
- Connecting to Multiple Indoor Units6
- Mounting the Controller7
Home Screen Display10
Operation14
- On/Off14
- Error Code Display15
Mode Settings16
- Cooling Mode Operation16
- Heating Mode Operation17
- Auto Mode Operation18
- Dry Mode Operation20
- Fan-Only Operation21
- Temperature Setpoint22
- Space Temperature and Space Humidity Display23
- Temperature Unit Switching (ºF/ºC)24
- Fan Speed25
- Swing26
- Weekly Schedule Settings Quick Access27
- Override Settings28
Schedule Management29
- Setup Schedule Templates31
- Paste a Schedule32
- Copy and Paste a Schedule Template32
- Copy a Schedule32
- Rename a Schedule Template34
- Delete a Schedule Template35
- Add a Daily Schedule Action36
- Delete a Daily Schedule Action37
- Rename a Daily Schedule Action37
- Edit a Daily Schedule Action38
- Setup a Weekly Schedule39
- Tap the Add Button40
- Rename a Weekly Schedule41
- Delete a Weekly Schedule42
- Modify a Weekly Schedule43
- Select the Weekly Schedule to Use44
- Setup Holiday and Special Day Schedules45
- Add a Holiday and Special Day Schedule46
- Rename a Holiday and Special Day Schedules47
- Modify a Holiday and Special Day Schedules48
- Delete a Holiday and Special Day Schedules49
- Override Scheduled Settings50
General Settings Configuration52
- Time Format Settings53
- Time Settings53
- Theme Settings54
- Brightness Settings54
- Controller Touch Tone (Sound) Settings55
- Standby Interface (Screen Saver) Settings56
- Standby (Screen Saver) Duration Settings57
Swing Angle Settings58
Daylight Savings Time Settings58
Room Temperature and Humidity Display Settings61
Contractor Information Input62
Service Menu63
- Access Service Menu63
- Change Password64
Master / Sub Wired Controller Settings65
Master / Sub Wired Controller Operation66
Indoor Unit Address Settings68
Indoor Unit Display Board & Buzzer (Sound) Settings69
Room Temperature Sensor Settings70
Auto Mode Settings72
Draft (Cold Blow) Prevention Settings74
Stand-By Fan Speed Settings75
Indoor Unit Static Pressure Settings76
Occupancy Sensor Function Settings77
Dry Mode Settings78
Auxiliary / Alternate Heat Settings79
Setpoint Limit Settings81
Locking Function Settings82
Advanced Information83
- Device Operation Information Query84
- Device Operation Error History Query86
- HHE Dry Contact Relay Interface Status Query90
- Controller Information91
Firmware and Setting Information92
- Software Version93
- Controller Software Update94
- Indoor Unit Software Update96
- Setting Parameters Backup99
- Setting Parameters Import100
- Reset Settings101
Help102
- Get On-Screen Help102

Brand	Lennox
Model	V0STAT51P-3
Category	Controller
Language	English

Lennox V0STAT51P-3 User Manual

Table of Contents

Questions and Answers:

Lennox V0STAT51P-3 Specifications

Related product manuals