Install the system board
Use this information to install the system board.
About this task
S017
CAUTION:
Hazardous moving fan blades nearby.
S012
CAUTION:
Hot surface nearby.
Attention:
• Read “Installation Guidelines” on page 25 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Procedure
Step 1. Touch the static-protective package that contains the new system board to any unpainted surface
on the outside of the server. Then, take the new system board out of the package and place it on a
static-protective surface.
Step 2. Install the new system board to the server.
Chapter 4. Hardware replacement procedures 111
To Next Page
Loading...
