Lenovo HR650X V2 - Nvme Configuration; Platform Configuration

Table 29. CSM configuration details (continued)
Option ROM Messages Force BIOS/Keep
Current
Set display mode for Option ROM.
INT19 Trap Response
Immediate/
Postponed
BIOS reaction on INT19 trapping by Option ROM.
Immediate: execute the trap right away.
Postponed: execute the trap during legacy boot.
HDD Connection Order Adjust/Keep Some OS require HDD handles to be adjusted, i.e. OS is
installed on drive 80h.
Boot Option Filter UEFI and Legacy/
Legacy Only/UEFI
only
This option controls Legacy/UEFI ROMs priority.
Option ROM Execution N/A
Network
Do not launch/UEFI/
Legacy
Control the execution of UEFI and legacy network
OpROM.
Storage Do not launch/UEFI/
Legacy
Control the execution of UEFI and legacy network
OpROM.
Video
Do not launch/UEFI/
Legacy
Control the execution of UEFI and legacy network
OpROM.
Other PCI Devices Do not launch/UEFI/
Legacy
Determine OpROM execution policy for devices other
than network, storage, or video.
NVMe configuration
See the table below for the descriptions of options in NVMe Configuration screen:
Table 30. NVMe configuration details
Item
Option
Description
NVMe Controller and Drive
Information
N/A
-
No NVME Device Found N/A
-
NVMe Controller and Drive
Information
N/A
-
Bus:E6 Dev:0 Func:0 N/A
-
Nvme Size N/A
-
Platform configuration
This section details Platform Configuration screen.
122
HR650X V2 User Guide