Table 41. Memory configuration details (continued)
Memory Frequency
Auto/1200/1333/1400/1600/1800/
18660/2000/2133/2200/2400/2600/
2666/2800/2933/3000/3200/3400-
OvrClk/3466-OvrClk/3600-OvrClk/
3733-OvrClk/3800-OvrClk/4000-
OvrClk/4200-OvrClk/4266-OvrClk/
4400-OvrClk/4800-OvrClk
Select maximum memory frequency in Mhz. If
Enforce POR option is disabled, user will be
able to run at higher frequencies than the
memory support (limited by processor
support). Do not select Reserved.
Custom Refresh Enable Disable/Enable Enable/Disable a custom memory refresh
rate.
Page Policy
N/A Set memory page policy parameters.
Memory Training
N/A Set DDR4 training options.
Memory Boot Health
Check
N/A Check whether the restored memory margin
offsets are within warning\critical limits.
Memory Timings Override N/A Select the XMP profile to use.
Memory Map
N/A Set memory mapping settings.
Memory RAS Configuration N/A
Display and provide options to change the
Memory RAS Settings.
Memory RAS Configuration
Setup
N/A
-
Pmem Configuration N/A Display and provide options to change the
PMem settings.
Memory Dfx Configuration N/A
Display and provide options to change the
memory Dfx settings.
BSSA Configuration Menu N/A Set configuration options for the BSSA tool.
CMI Init Configuration N/A Help to configure CMI Init.
IIO configuration
See the table below for the descriptions of options in IIO Configuration screen:
Table 42. IIO configuration details
Item
Option
Description
Socket0 Configuration N/A
-
Socket1 Configuration N/A
-
IOAT Configuration N/A Display and set all IOAT configuration options.
PCIE OPROM Slot Options N/A Display and set PCIE OPROM slot options.
Intel VT for Directed I/O (VT-d) N/A
Press Enter to bring up the Intel® VT for Directed I/O
(VT-d) Configuration menu.
Intel® VMD technology
N/A
Press Enter to bring up the Intel® VMD for Volume
Management Device Configuration menu.
Intel® AIC Retimer/AIC SSD
Technology (non-VMD)
N/A
Press Enter to bring up the Intel® AIC Retimer/AIC SSD
configuration menu.
Chapter 5. BIOS setup 129
To Next Page
Loading...
