• “Remove a rearwall bracket” on page 69
• “Install a rearwall bracket” on page 70
Rearwall bracket matrix
Server rear config.
Required rearwall brackets
Configuration with 7
PCIe slots
The server requires two rearwall brackets:
Rearwall bracket on the left
Rearwall bracket on the right
Configuration with 4 x
2.5-inch rear drives and
5 PCIe slots
The server requires two rearwall brackets:
Rearwall bracket on the left
Rearwall bracket on the right
Configuration with 4 x
3.5-inch rear drives and
3 PCIe slots or 2 PCIe
slots
The server requires two rearwall brackets:
Rearwall bracket on the left
Rearwall bracket on the right
Remove a rearwall bracket
Use this information to remove a rearwall bracket.
About this task
Attention:
• Read “Installation Guidelines” on page 25 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
Chapter 4. Hardware replacement procedures 69
To Next Page
Loading...
