Chapter 5. BIOS setup
This chapter will provide details about BIOS setup via the Unified Extensible Firmware Interface (UEFI).
Starting BIOS setup
To enter the BIOS setup, reboot the server and press the setup hot-key according to the prompted
information during the POST.
Main menu
Select Main, then the following window is displayed:
The table below describes the Main screen:
Table 20. Main details
Item
Option
Description
System Information N/A List information about BIOS Build ID, Product
Name, BIOS Version, Build Date and Time,
SPS Version, SPS Current State, Intel RC
Revison, BMC Version, BMC Self Test Status,
BMC IP Address, and FPGA Version.
Usable Memory
N/A
Describe the memory capacity that can be
used.
Physical Memory
N/A
Describe the physical memory capacity.
© Copyright Lenovo 2021 115
To Next Page
Loading...
