Lenovo HR650X V2 - Miscellaneous Configuration; Server ME Debug Configuration; Runtime Error Logging

Table 32. PCH configuration details (continued)
PCH SATA Configuration N/A Specify SATA devices and settings.
PCH sSATA Configuration N/A Specify sSATA devices and settings.
USB Configuration N/A Set USB configuration.
Azalia Configuration N/A Set Azalia-related configuration.
Platform Thermal Configuration N/A Set platform thermal configuration.
ADR Configuration N/A Set automatic DIMM refresh (ADR) configuration.
PCH DFX Configuration N/A Set PCH DFX configuration.
PCH DWR Configuration N/A Set PCH DWR configuration.
DCI Enable (HDCIEN) Disable/Enable When DCI is enabled, user agrees to enable the DCI
which allows debugging over the USB3 interface. When
disabled, the host control will not enable DCI feature.
Miscellaneous configuration
See the table below for the descriptions of options in Miscellaneous Configuration screen:
Table 33. Miscellaneous configuration details
Item
Option
Description
Wake On Lan Support Disable/Enable Enable or disable Wake On Lan Support.
RTC Wake System From S4/S5 Disable/Enable Enable or disable system wake on alarm event. When
enabled, system will wake on the day you specified. The
format is as follows:
: : hr : : min : : sec
Server ME debug configuration
See the table below for the descriptions of options in Server ME Debug Configuration screen:
Table 34. Server ME debug configuration details
Item
Option
Description
Server ME General Configuration N/A Set server ME basic features.
NM Configuration N/A Set options to configure NM features.
ME UEFI FW Health Status N/A Display information about ME UEFI FW health status.
Runtime error logging
See the table below for the descriptions of options in Runtime Error Logging screen:
Table 35. Runtime error logging details
Item
Option
Description
System Errors Disable/Enable Enable/Disable System Error setup options.
System Memory Poison Disable/Enable Enable/Disable System Memory Poison.
124 HR650X V2 User Guide