Lenovo HR650X V2 - Exit

Exit
This section details Exit screen.
Select Exit, then the following window is displayed:
The table below describes the options in Exit screen:
Table 59. Exit details
Item Description
Save Options
-
Save Changes and Exit Exit system setup after saving the changes. F10 key can be used for
this operation.
Discard Changes and Exit
Exit system setup without saving any changes. Esc key can be used
for this operation.
Save Changes and Reset Reset the system after saving the changes.
Discard Changes and Reset Reset system setup without saving any changes.
Save Changes Save changes done so far to any of the setup options.
Discard Changes Discard changes done so far to any of the setup options. F3 key can
be used for this operation.
Default Options
-
Load UEFI Defaults Load UEFI default values for all the setup options. F4 key can be
used for this operation
142 HR650X V2 User Guide