Lenovo HR650X V2 - Redfish Host Interface Settings

Table 23. Trusted computing details
Item
Option
Description
Security Device Support Disable/Enable Enable or disable BIOS support for
security devices. OS will not show
security device. TCG EFI protocol
and INT1A interface will not be
available.
Disable Block SID Disabled/Enabled Override to allow SID authentication
in TCG storage device.
NO Security Device Found N/A
-
TPM2.0 Device Found
N/A
-
Firmware Version
N/A
-
Vendor
N/A
-
Security Device Support Enable/Disable
-
Active PCR banks N/A
-
Available PCR banks N/A
-
SHA-1 PCR Bank Disabled/Enabled
-
SHA256 PCR Bank Disabled/Enabled
-
SHA384 PCR Bank Disabled/Enabled
-
Pending Operation None/TPM Clear
-
Platform Hierarchy Disabled/Enabled
-
Storage Hierarchy Disabled/Enabled
-
Endorsement Hierarchy
Disabled/Enabled
-
TPM2.0 UEFI Spec Version N/A
-
Physical Presence Spec Version N/A
-
TPM 2.0 Interface Type N/A
-
Device Select TPM 1.2/TPM 2.0/AUTO
-
Redfish host interface settings
See the table below for the descriptions of options in Redfish Host Interface Settings screen:
Table 24. Redfish host interface settings details
Item
Option
Description
Redfish Disabled/Enabled Enable/Disable AMI Redfish.
BMC Redfish Version N/A
-
BIOS Redfish Version N/A
-
Authentication Mode Basic
Authentication/
Session
Authentication
Select authentication mode.
Redfish BMC Settings N/A
-
Chapter 5. BIOS setup 119