Lenovo HR650X V2 - Processor, Memory, and Power Management Settings

Table 22. Lenovo advanced details (continued)
PCI/PCIE
Settings
OCP Port n PXE Disabled/Enabled Enable/Disable the PXE function of the
OCP card.
USB Settings USB Devices: n Drive, n
Keyboards, n Mouse, n Hubs
N/A Display the quantity of different USB
devices, such as keyboards, mouses,
and so on.
USB Pre-Connector Disable Disabled/Enabled Selectively enable/disable each of the
USB physical connectors (physical
ports). Once a connector is disabled,
any USB device plugged into the
connectors will not be detected by BIOS
or OS.
Front USB2.0 Port n Disabled/Enabled Enable/Disable this USB physical
connector (physical port). Once
disabled, any USB device plugged into
the connectors will not be detected by
BIOS or OS.
Front USB3.0 Port n Disabled/Enabled Enable/Disable this USB physical
connector (physical port). Once
disabled, any USB device plugged into
the connectors will not be detected by
BIOS or OS.
Network
Settings
PXE Retry Count N/A PXE retry count can be set from 0 to 50,
and 50 means the server will always
retry.
PXE Ports Retry Count N/A
PXE ports retry count can be set
between 0 to 3.
Boot Retry Count N/A PXE retry count can be set from 0 to 50,
and 50 means the server will always
retry.
Boot Fail Policy
Halt/Reboot If all bootable devices are retried and
related controls are also applied but the
boot still fails, halt or reboot the system.
Driver Health
-
N/A Provide health status for drivers/
controllers.
Fan Profile
-
Performance/Automatic/
Acoustic
-
Power
Technology
-
Disable/Energy
Efficient/Custom/Max
Performance/Nominal
Frequency
Enable the power management features.
[Nominal Frequency]
Set CPU working in nominal frequency
when system is idle.
Trusted computing
See the table below for the descriptions of options in Trusted Computing screen:
118
HR650X V2 User Guide