FRU Information
The FRU Information page is used to primarily provide inventory information about the boards that the FRU
information device is located on. It is a goal that all major field replaceable units (FRUs) have a storage device
from which, at a minimum, the part number for version number can be read through software. It is also a goal
that the FRUs serial number be software readable.
The BMC firmware also supports to show other FRU of devices in Web UI.
The FRU Information page displays the BMC FRU file information. When selecting any available FRU Device
ID, its corresponding FRU information will be displayed. It displays the FRU device name for the selected
FRU device ID. Also, on FRU default page, it displays the Chassis, Board, and Product details (if available) for
the items shown in each field as below figure.
Logs & Reports
The Logs & Reports page displays the system important logs, such as IPMI SEL log, System log, Audit log,
and Video log.
152
HR650X V2 User Guide
To Next Page
Loading...
