Lenovo HR650X V2 - Uncore Configuration; Memory Configuration

Table 39. Common RefCode configuration details
Item
Option
Description
Numa
Disable/Enable Enable or disable Non Uniform Memory Access (NUMA).
Common RefCode
Dfx Configuration
N/A Display and provide options to change the common RefCode Dfx
settings.
Uncore configuration
See the table below for the descriptions of options in Uncore Configuration screen:
Table 40. Uncore configuration details
Item
Option
Description
Uncore General Configuration N/A
Display and provide options to change the Uncore
settings.
Uncore Per Socket Configuration N/A Set the Uncore per socket configuration.
Uncore Dfx Configuration N/A Display and provide options to change the Uncore Dfx
settings.
Uncore Dfx Per Socket
Configuration
N/A Set Uncore Dfx per socket configuration.
Memory configuration
See the table below for the descriptions of options in Memory Configuration screen:
Table 41. Memory configuration details
Item
Option
Description
Integrated Memory
Controller (iMC)
N/A
-
STEP DRAM Test Disable/Enable Enable or disable STEP (Samsung TestBIOS
& Enhanced PPR) function
Operation Mode Test Only/Test and Repair Set operation mode.
SmartTest Disable/Enable Enable or disable SmartTest function. Default
is enable. Enabling means run Smart-Test
during the cold boot.
Enforce POR POR/Disable Enable: enforce Plan Of Record restrictions
for DDR4 frequency and voltage
programming.
Disable: disable this feature and user is able
to run at higher frequencies, specified in the
DDR Frequency Limit field (limited by
processor support).
Auto: set it to the MRC default setting (current
default is Enable).
Enforce Population POR Disable Enforcement/Enforce
Supported Populations/Enforce
Validated Populations
Enable Memory Population POR
Enforcement. Selecting Enforce Validated
Populations will only allow populations that
have been validated.
128 HR650X V2 User Guide