S017
CAUTION:
Hazardous moving fan blades nearby.
Attention:
• Read “Installation Guidelines” on page 25 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
Procedure
Step 1. Select the appropriate air baffle for your server.
Step 2. Align the tabs on both sides of the air baffle with the corresponding slots on both sides of the
chassis. Then, lower the air baffle into the chassis and press the air baffle down until it is securely
seated.
Note: The illustrated air baffle is a standard air baffle. The installation method is the same for the
GPU air baffle.
Figure 21. Installation of the standard air baffle
After you finish
Chapter 4. Hardware replacement procedures 43
To Next Page
Loading...
