8.Carefullyliftupthebackplane.Whenthehooks1onthechassisarealignedwiththecorresponding
holesinthebackplane,slowlymovethebackplanealittlebitoutward.Then,completelyremovethe
backplane.
Figure86.Removingthebackplane
9.Touchthestatic-protectivepackagethatcontainsthenewhot-swapharddiskdrivebackplanetoany
unpaintedsurfaceontheoutsideoftheserver.Then,removethenewbackplanefromthepackage.
Note:Carefullyhandlethebackplanebyitsedges.
Chapter6.Installing,removing,orreplacinghardware135
To Next Page
Loading...
