4.Removethemicroprocessorfromthemicroprocessorsocket.
Releasethehandleasshown.
Liftthehandleupwarduntilthehandleandthemicroprocessorretainerareinthefullyopen
position.
Holdthemicroprocessorbyitssidesandcarefullyliftitstraightupandoutofthemicroprocessor
socket.
Notes:
•Donottouchthegoldcontactsonthebottomofthemicroprocessor.
•Donotdropanythingontothemicroprocessorsocketwhileitisexposed.Thesocketpinsmustbe
keptascleanaspossible.
Figure73.Removingthemicroprocessor
5.Touchthestatic-protectivepackagethatcontainsthenewmicroprocessortoanyunpaintedsurfaceon
theoutsideoftheserver.Then,removethenewmicroprocessorfromthepackage.
90ThinkServerRS160UserGuideandHardwareMaintenanceManual
To Next Page
Loading...
