2.3.6. Controller location LED
Status LED Color Status Description
9 Controller
location LED
On or blinking Blue The controller location LED is manually
activated to help locating the
controller.
Off None The controller location LED is not
activated.
2.3.7. NVRAM LED
Status LED Color Status Description
10 NVRAM LED Blinking Green IO is being written to local flash
memory.
On Green Data is in cache and has not been
written to local disks.
Off None No data is in cache that needs to be
written to local disks.
2.3.8. Host Interface Card LEDs
The following are the LEDs for the host interface cards (HIC) that are supported by the DM3010H.
SFP+ 32/16Gb fiber channel LEDs
Each SFP+ 32Gb fiber channel HIC has two status LEDs.
Status LED Color Status Description
1 SFP+ port link
LED
Green On A link is established between the port
and some upstream device.
None Off No link is established.
8
To Next Page
Loading...
