Lenovo ThinkSystem DM3010H - Shut down the Impaired Controller - DM3010 H

If the command fails, contact Lenovo Support.
datacentersupport.lenovo.com
b.
Verify that the
Restored column equals yes for all authentication keys: security key-
manager key query
c.
You can safely shut down the controller.
4.
If the
Key Manager type displays onboard and the Restored column displays anything other than
yes:
a.
Enter the onboard security key-manager sync command:
security key-manager onboard
sync
Enter the customer’s onboard key management passphrase at the prompt. If the
passphrase cannot be provided, contact Lenovo Support.
datacentersupport.lenovo.com
b.
Verify the
Restored column shows yes for all authentication keys: security key-manager
key query
c.
Verify that the
Key Manager type shows onboard, and then manually back up the OKM
information.
d.
Go to advanced privilege mode and enter
y when prompted to continue: set -priv
advanced
e.
Enter the command to display the key management backup information:
security key-
manager onboard show-backup
f.
Copy the contents of the backup information to a separate file or your log file. You’ll need it
in disaster scenarios where you might need to manually recover OKM.
g.
Return to admin mode:
set -priv admin
h.
You can safely shut down the controller.
5.1.3. Shut down the impaired controller - DM3010H
Shut down or take over the impaired controller.
After completing the LVE or LSE tasks, you need to complete the shutdown of the impaired
controller.
Steps
a.
Take the impaired controller to the LOADER prompt:
If the impaired controller
displays…
Then…
The LOADER prompt Go to Remove controller module.
34