2.
Cable the e0M ports to the management network switches with the RJ45 cables:
3.
Cable the mezzanine card ports to your host network.
a.
If you have a 4-port Ethernet data network, cable ports e1a through e1d to your
Ethernet data network.
▪ 4-ports, 10/25Gb Ethernet, SFP28
▪ 4-ports, 10GBASE-T, RJ45
b.
If you have a 4-port Fiber Channel data network, cable ports 1a through 1d for your FC
network.
21
To Next Page
Loading...
