controller module.
4.
If you left the SFP modules in the system after removing the cables, move them to the
replacement controller module.
5.
Squeeze the latch on the cam handle until it releases, open the cam handle fully to release the
controller module from the midplane, and then, using two hands, pull the controller module out
of the chassis.
6.
Turn the controller module over and place it on a flat, stable surface.
7.
Open the cover by pressing the blue buttons on the sides of the controller module to release
the cover, and then rotate the cover up and off of the controller module.
51
To Next Page
Loading...
