Server model: sixteen 2.5-inch SAS/SATA drives, eight 2.5-inch NVMe drives, the rear hot-swap drive
assembly, two 16i RAID adapters, one NVMe switch adapter
Figure 51. Cable routing for server models with sixteen 2.5-inch SAS/SATA drives, eight 2.5-inch NVMe drives, the rear
hot-swap drive assembly, two 16i RAID adapters, and one NVMe switch adapter
Cable
From To
1 Power cable for front backplane 1 Power connector on front backplane
1
Backplane power connector 1 on the
system board
2 SAS signal cable for front
backplane 1
SAS 0 and SAS 1 connectors on front
backplane 1
C0 and C1 connectors on the 16i
RAID adapter installed on the RAID
adapter slot
3 NVMe signal cable for front
backplane 1
NVMe 0, NVMe 1, NVMe 2, and
NVMe 3 connectors on front
backplane 1
NVMe 0–1 and NVMe 2–3 connectors
on the system board
4 NVMe signal cable for front
backplane 2
NVMe 0, NVMe 1, NVMe 2, and
NVMe 3 connectors on front
backplane 2
C0, C1, C2, and C3 connectors on
the NVMe switch adapter installed on
PCIe slot 5
5 SAS signal cable for front
backplane 2
SAS 0 and SAS 1 connectors on front
backplane 2
C2 and C3 connectors on the 16i
RAID adapter installed on the RAID
adapter slot
6 Power cable for front backplane 2 Power connector on front backplane
2
Backplane power connector 2 on the
system board
76 ThinkSystem SR650 Maintenance Manual
To Next Page
Loading...
