Cable From To
7 Power cable for front backplane 3 Power connector on front backplane
3
Backplane power connector 3 on the
system board
8 SAS signal cable for front
backplane 3
SAS 0 and SAS 1 connectors on front
backplane 3
C0 and C1 connectors on the 16i
RAID adapter installed on PCIe slot 4
9 SAS signal cable for the rear hot-
swap drive assembly
Signal connector on the rear hot-
swap drive assembly
C2 connector on the 16i RAID
adapter installed on PCIe slot 4
Chapter 2. Server components 77
To Next Page
Loading...
