Lenze 8400 motec Series - Device-Specific Safety and Residual Hazards

Lenze · Decentralised frequency inverter 8400 motec (CANopen option) · EDS84DMOTCAN EN 4.0 - 02/2019 11
Safety instructions
Device and application-specific safety instructions
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2.2 Device and application-specific safety instructions
• During operation, the Communication Unit must be connected to the Wiring Unit and the Drive
Unit.
• In case of external voltage supply, each control cabinet must be provided with a safely
separated power supply unit ("SELV"/"PELV") according to EN 61800-5-1.
• Only use cables that meet the listed specifications.
Specification of the bus cable
( 24)
2.3 Residual hazards
Device protection
• The Communication Unit contains electronic components that can be damaged or destroyed by
electrostatic discharge.
Installation
( 20)
 Documentation of "Inverter Drives 8400 motec", control system, plant/machine
All the other measures prescribed in this documentation must also be implemented.
Observe the safety instructions and application notes contained in this manual.