Lenze 8400 motec Series - Features and Variants

Lenze · Decentralised frequency inverter 8400 motec (CANopen option) · EDS84DMOTCAN EN 4.0 - 02/2019 13
Product description
Features and variants
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.2 Features and variants
The CANopen communication unit is available in the following versions:
• The CANopen communication unit ...
• mounted on top of the Wiring Unit (E84DGVNxx);
• is exclusively supplied internally by the drive unit (E84DGDVxxxxxxxx).
• The I/O connections can be brought into the device via M12 connectors or cable glands.
• In the E84DGFCC9xx version, a maximum of four digital inputs is conducted on M12 connectors
(see "Inverter Drives 8400 motec" hardware manual).
• Devices without an integrated safety system (safety option) have no analog input and no relay
output.
• In the case of the E84DGFCCxJx communication units, the integrated safety system can be used
for the protection of persons on machines.
• Setting of the CAN node address and baud rate is possible via DIP switch or code.
• Communication with the Lenze »Engineer« (access to all Lenze parameters) is preferably carried
out via the CAN bus. Furthermore communication can be effected via the diagnostic interface
of the drive unit.
Product series Type designation Product features
Enclosure Connection CANopen I/O: Connection via terminal I/O: Connection via M12 Safety
Inverter Drives 8400 motec
CANopen communication unit
E84DGFCCFNP IP 65 M12 3× DI
1× DO
2× DI
E84DGFCCENP IP 65 M12 2× DI 3× DI
1× DO
E84DGFCCFJP IP 65 M12 3× DI
1× DO
1× AI
2× DI 
E84DGFCCEJP IP 65 M12 3× DI 2× DI
1× DO
1× AI

 "Inverter Drives 8400 motec" hardware manual
Here you will find detailed information on the integrated safety system (safety option).
Software manual / »Engineer« online help "Inverter Drives 8400 motec"
Here you will find detailed information on how to configure the safety system (safety
option).