Parameter setting
Parameter setting with the XT EMZ9371BC keypad
Display elements and function keys
7
7.2
7.2.3
7.2−3
EDSVF9383V EN 6.0−11/2009
Status displays of standard device
Display Meaning Explanation
#
Ready for operation
Active pulse inhibit Power outputs are inhibited
$
Set current limit exceeded in motor
or generator mode
%
Speed controller 1 in the limitation Drive is torque−controlled
(Only active when operated with
standard devices of the 9300
series)
&
Active fault
Acceptance of parameters
Display Meaning Explanation
' Parameter is accepted immediately Standard device starts working
with the new parameter value
immediately
SHPRG '
Parameter must be confirmed with
(
Standard device starts working
with the new parameter value
after confirmation
SHPRG In case of controller inhibit,
parameter must be confirmed with
(
Standard device starts working
with the new parameter value
after the controller has been
re−enabled
None Display parameters Cannot be changed
Active level
Display Meaning Explanation
Menu Menu level active Select main menu and submenus
Code Code level active Select codes and subcodes
Para Parameter level active Change parameters in codes or
subcodes
None Operating level active Display operating parameters
Short text
Display Meaning Explanation
Alphanumeric
Contents of menus, meanings of
codes and parameters
In the operating level display of
C0004 in % and in the active fault
Number
Active level Meaning Explanation
Menu level Menu number Only active if standard devices of
the 8200 vector or 8200 motec
series are used
Code level Four−digit code number
Number
Active level Meaning Explanation
Menu level Submenu number Only active if standard devices of
the 8200 vector or 8200 motec
series are used
Code level Two−digit subcode number
Parameter value
Parameter value including unit
Cursor
In the parameter level, the digit above the cursor can be changed directly
Function keys
See the following table for description
Displays
efesotomasyon.com - Lenze
To Next Page
Loading...
