Lenze C520 - Delete Log Files

6.6.8 Delete log les
Parameter
Address Name / seng range / [default seng] Informaon
0x2022:037 Device commands: Delete Logles
•
When the device command has been executed successfully, the value
0 is shown.
•
Do not switch o the supply voltage or remove the SD card from the
controller while the device command is being executed.
0 O / ready Only status feedback
1 On / start Deleon of log les on the device that were exported in an earlier step
via 0x2022:036 (Export Logbook).
2 In progress Only status feedback
3 Acon cancelled
4 No access
5 No access (Device disabled)
4Logbook ^ 94
Device sengs
Device commands
Delete log les
33