Lenze C520 - Reset Controller

9.4 Reset controller
To reset the device, press the reset buon. 4Features ^ 12
How to carry out a restart:
1. Keep the reset key pressed for approx. 1 s.
The LEDs are o.
Aer the restart, the LED "RUN" is green.
How to carry out a hardware reset:
1. Keep the reset key pressed for approx. 5 s.
The LEDs are o.
Aer the hardware reset, the LED "RUN" is green.
Depending on the state of the device funcons, no retain data is saved when
the device is reset via the reset key.
Relevant parameters of other funcons
Address Name Default seng Seng range
0x2022:001 Device commands: Load default sengs O / ready [0] Selecon list
0x2022:039 Device commands: Load TA default sengs O / ready [0] Selecon list
Related topics
4Reset parameters to default ^ 23
Device funcons
Reset controller
83