Lenze E82ZAFPC201 - Wiring with a Host (Master)

Installation
Electrical installation
Wiring with a host (master)
5
l
20
EDS82ZAFPC201 EN 4.0
5.2.2 Wiring with a host (master)
Basic design of a PROFIBUS network with RS485 cabling without repeater
starttec
8200 vector
8200 motec
+
E82ZAFPC201
starttec
8200 vector
8200 motec
+
E82ZAFPC201
starttec
8200 vector
8200 motec
+
E82ZAFPC201
333
1
222
0m
1200 m
E82ZAFP005
No. Element Note
1 Host E.g. PC or PLC with PROFIBUS master interface module
2 Bus cable Connects the PROFIBUS master interface module to the function modules.
l The baud rate depends on the length of the bus cable (^ 22).
3 PROFIBUS slave Applicable standard device (^ 11)with function module
l Activate bus terminating resistors at the first and last physical node
(^ 33).
) Note!
When using a repeater, max. 125 nodes can communicate via the PROFIBUS.