Lenze E82ZAFPC201 - Process Input Data Configuration

Process data transfer
Lenze device control
Process input data configuration
7
l
41
EDS82ZAFPC201 EN 4.0
7.1.2 Process input data configuration
The assignment of the bit status information or the actual controller values to the up to 10
process data input words (PIW) of the master can be freely configured:
ƒ To call DRIVECOM−conform status information, assign the DRIVECOM status word to
a PIW (C1511/x = 18).
The FIF status word1 is mapped to the DRIVECOM status word.
ƒ To call PROFIdrive−conform status information, assign the PROFIdrive status word to
a PIW (C1511/x = 20).
The FIF status word1 is mapped to the PROFIdrive status word.