EasyManua.ls Logo

Lenze E94AYCEO - Page 95

Lenze E94AYCEO
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 Parameter reference
13.2 Parameters of the communication module for slot MXI1
95
Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C13022
C13840
C13841
Parameter | Name:
C13022 | Quality of Service (DSCP)
Data type: UNSIGNED_8
Index: 11553 = 0x2D21
Setting for the prioritisation of the data packets to be transferred using Differentiated Services Codepoints (DSCP)
Setting range (min. value | unit | max. value)
063
Subcodes Lenze setting Info
C13022/1 59 Reserved
C13022/2 47 Reserved
C13022/3 55 Reserved
C13022/4 47 QoS DSCP Scheduled
(Instance attribute 5 (DSCP Scheduled) in the Quality of
Service (QoS) Object (72 / 0x48) ( 130))
C13022/5 43 QoS DSCP High Prio
(Instance attribute 6 (DSCP High Prio) in the Quality of
Service (QoS) Object (72 / 0x48) ( 130))
C13022/6 31 Reserved
C13022/7 27 QoS DSCP Explicit Msg
(Instance attribute 8 (DSCP Explicit Msg.) in theQuality of
Service (QoS) Object (72 / 0x48) ( 130))
Read access Write access CINH PLC STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13840 | DLR Network Topology
Data type: UNSIGNED_8
Index: 10735 = 0x29EF
Display of the used DLR network topology (Device Level Ring)
(Instance attribute 1 (Network Topology) in the Device Level Ring (DLR) Object (71 / 0x47)
( 128))
Selection list (read only)
0 Linear
1 Ring
Read access Write access CINH PLC STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13841 | DLR Network Status
Data type: UNSIGNED_8
Index: 10734 = 0x29EE
Display of the DLR network status (Device Level Ring)
(Instance attribute 2 (Network Status) in the Device Level Ring (DLR) Object (71 / 0x47)
( 128))
Selection list (read only)
0 Normal
1 Ring Fault
2 Unexpected Loop detected
3 Partial network fault
4 Rapid fault/restore cycle
Read access Write access CINH PLC STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT

Table of Contents

Related product manuals