Lenze EVF9327

Parameter setting
Parameter setting with the XT EMZ9371BC keypad
Changing and saving parameters
7
7.2
7.2.4

7.2-6
EDSVF9333V EN 3.0-06/2005
ActionKey
sequence
Step
12.
Change to the code level
A  Display of the operating level
B  Display of C0003 ”PAR SAVE”
13. Parameter setting for another
parameter set
Restart the ”loop” with step 1. or 3.
1)
The function of the key  can be programmed:
C0469 = 1: Controller inhibit
C0469 = 2: Quick stop (Lenze setting)