Lenze EVF9327

Installing the basic device
Basic devices in the power range 15 ... 30 kW
Thermally separated mounting (push-through technique)
4
4.2
4.2.3

4.2-3
EDSVF9333V EN 3.0-06/2005
4.2.3 Thermally separated mounting (push-through technique)
For mounting in push-through technique, the drive controller of type
EVF93xx-EV must be used. In addition, the mounting set for E J0011
push-through technique is required.
h
c1
c2
c3
h
d1
d2
d3
d2
d
b
a1
a
g
b1
e1
e
L
9300vec116
Fig. 4.2-2 Dimensions for thermally separated m ounting 15 ... 30 kW
9300 vector Dimensions [mm]
Type a a1 b b1 c1 c2 c3 d d1 d2 d3 e
1)
e1 g h
EVF9327-EV
EVF9328-EV
EVF9329-EV
279.5 250 379.5 350 19 131 243 361.5 32 100 97 250 159.5 6 9
1)
For a fieldbus module plugged onto X1, consider mounting space for connecting cables
9300 vector Dimensions [mm]
Type Width Height
EVF9327-EV
EVF9328-EV
EVF9329-EV
236 336
Dimensions
Mounting cutout in control
cabinet