Lenze L-force 9400

Preface
The 9400 Servo Drives product range
System overview
1

11
EDS94SPP101 EN 10.2
0
1
2
3
4
567
8
9
:
;
<
=
>?
@./
=
SSP94SYS01
 Mains voltage 3/PE AC 180 ... 528 V ±0 % or 3/PE AC 340 ... 528 V ±0 %
(depending on the device size/device power)
 Mains fusing (not contained in the delivery programme)
 Single Drives 9400  31
and corresponding installation backplanes
 Mains filter for Single Drives 9400  537
 RFI filter for Single Drives 9400  566
 Multi Drives 9400  165
and corresponding installation backplanes
 Power supply modules 9400
 238,  285
(for DC bus installations with Multi Drives 9400)
 Mains filter for power supply modules 9400  544
 RFI filter for power supply modules 9400  584
Equipment for all axis modules (device−dependent options):
 Communication modules and extension modules  368
 Memory modules  416
 Safety modules  424
 Motor holding brake control modules  444
 Brake resistors  620
 Diagnostic adapters  502
 L−force Engineer (software)
 Servo motors
(motor catalogue)
 Geared servo motors ( " )
 Standard geared motors ( " )
Motor cables/system cables
(manual "System cables")