Accessories (overview)
Overview of accessories
8
365
EDS94SPP101 EN 10.2
8.2 Overview of accessories
With the accessories available, the standard devices of the controllers of the
Servo Drives 9400 series are directly equipped with functions, interfaces, etc. required for
specific drive solutions.
The following overview shows the accessories assigned to the controllers and power
supply modules.
1) Component from this range is absolutely necessary
+ Can be used without restrictions
o Can be used with restrictions
− Can be used, but check alternative
^ Already included
−−− No use
Accessories Single Drive Multi Drive Power supply
modules
VR
modules
Page
Field GG (device size) GG GG GG
Designation 1 ... 3 6 ... 7 81 ... 91 1 ... 3 6 1 & 3 4 & 5 1 & 3
Device modules
Communication modules
from
368
CANopen® E94AYCCA + + + + + −−− −−− +
DeviceNet E94AYCDN + + + + + −−− −−− +
Ethernet 2 Port E94AYCEN + + + + + −−− −−− +
EtherNet/IP E94AYCEO + + + + + −−− −−− +
POWERLINK MN/CN
E94AYCEP
+ + + + + −−− −−− +
POWERLINK CN E94AYCEC + + + + + −−− −−− +
EtherCAT® E94AYCET + + + + + −−− −−− +
PROFIBUS® E94AYCPM + + + + + −−− −−− +
PROFINET® E94AYCER + + + + + −−− −−− +
INTERBUS E94AYCIB + + + + + −−− −−− +
Function modules
from
410
Digital frequency
E94AYFLF
+ + + + + −−− −−− −−−
Cover module + + + + + −−− −−− +
Memory modules 1)
from
416
MM220 E94AYM220 −−− −−− −−− −−− −−− −−− −−− +
MM330 E94AYM330 + + + + + −−− −−− −−−
MM340 E94AYM340 + + + + + −−− −−− −−−
MM430 E94AYM430 + + + + + −−− −−− −−−
MM440 E94AYM440 + + + + + −−− −−− −−−
Safety modules 1)
from
424
SM0 E94AYAA + + + + + −−− −−− +
SM100 E94AYAB + + + + + −−− −−− −−−
SM301 E94AYAE + + + + + −−− −−− −−−
SM302 E94AYAF + + + + + −−− −−− −−−
Motor holding brake control modules
from
444
Voltage class 24 V
E94AZHX0051
E94AZHA0051
+ −−− −−− + −−− −−− −−− −−−