Lenze L-force 9400

Accessories (overview)
Motor holding brake control modules
Overview
8

444
EDS94SPP101 EN 10.2
8.7 Motor holding brake control modules
8.7.1 Overview
The motor brake control modules differ in the following features:
ƒ Rated voltage
ƒ Device size assignment
ƒ Mounting type
The table shows the module/controller assignments according to the features listed.
Single−axis controllers Rated voltage of motor holding brake (control module)
Type 24 V 205 V 180 V
E94ASxE0024
...
E94ASxE0244
GG1
...
GG3
E94AZHX0051
 
E94AZHA0051
 
E94AZHN0025
 
E94AZHN0026
 
E94ASxE0324
...
E94ASxE1044
GG6
...
GG7
E94AZHY0101
 
E94AZHB0101
 
E94AZHN0025
 
E94AZHY0025
 
E94AZHN0026
 
E94AZHY0026
 
E94BSxE1454
...
E94BSxE4604
GG81
...
GG91
E94AZHY0101
 
E94AZHB0101
 
E94AZHN0025
 
E94AZHY0025
 
E94AZHN0026
 
E94AZHY0026
 
Single−axis controllers Rated voltage of motor holding brake (control module)
Type 24 V 205 V 180 V
E94AMxE0024
...
E94AMxE0324
GG1
...
GG3
E94AZHX0051
 
E94AZHN0025
 
E94AZHN0026
 
E94AMxE0474
...
E94AMxE0594
GG6
E94AZHY0101
 
E94AZHB0101
 
E94AZHN0025
 
E94AZHY0025
 
E94AZHN0026
 
E94AZHY0026
 
Tab. 8−2 Motor holding brake/control module assignment
GGx Device size
 integrated in the installation backplane, already used or retrofittable
 integrated in the device, already applied or retrofittable
(recommended variant for the same rated voltage)
 integrated control module (automatic brake operation can be activated)
 external control (via digital output/digital input)
 external mounting (DIN rail or mounting plate)