Accessories (overview)
Communication modules
Ethernet interface
8
386
EDS94SPP101 EN 10.2
Pos. Description
X232 Connection for external voltage supply
2−pole plug connector with spring connection
X233
EtherNet/IP connections
RJ45 sockets
With 2 LED status displays, respectively, for diagnostics
X234
ST
LED status displays for diagnostics
ER
MS
NS
DE
Module status displays
Module status displays are displayed by the LEDs ST, ER and DE.
E94YCEO001E
LED Colour Status Description
ST green on
The communication module is being supplied with voltage and is
connected to the standard device.
blinking
250 ms
250 ms
The communication module is supplied with voltage but has no connection
to the standard device (The standard device is either switched off, in the
initialisation phase, or not available).
ER red on
A communication module error has occurred.
DE red on
The communication module is not accepted by the standard device or the
standard device is not active. (See notes provided in the documentation for
the standard device.)
To Next Page
Loading...
