Accessories (overview)
Safety modules
SM301
8
434
EDS94SPP101 EN 10.2
Displays
Pos. Colour State Description
MS
(Module State)
Green
On
Drive−based safety has initialised without a fault.
Blinking
Drive−based safety has initialised without a fault. Internal
communication to the standard device is not possible.
Flashing
Drive−based safety is in service status.
For exiting, parameterise the drive−based safety.
Off
Drive−based safety is not initialised.
Acknowledgement is not possible.
EN
(Enable)
Yellow
On
Controller enabled
Off
Non−safe display "STO"
ME
(Module Error)
Red
On
System error
Blinking
Trouble
Flashing
Warning
Off Error−free operation
AS
(Acknowledge Stop)
Yellow
On
Request of an acknowledgement for the restart or the
parameter set adoption
Blinking
SS1/STO active
Flashing
SS2/SOS active
Off No stop function active
BE
(Bus Error)
Red
On
Safety bus error:
Communication is not possible.
Acknowledgement is possible.
Blinking
Safety bus error: no valid configuration.
Off Safety bus: error−free operation.
DE
(Drive Error)
Red
On
Drive−based safety is not accepted by the standard device
(see notes in the instructions for the standard device).
Off
Drive−based safety is correctly recognised by the standard
device.
Blinking: on/off every 0.5 s Flashing: on/off every 0.1/0.9 s
Application range
The use of this module is permissible with standard devices of the 9400 product series from
nameplate designation
Type HW SW
E94AxHExxxx VA 01.49
E94AxPExxxx 2A 02.xx
The use of this module is permissible with the PROFIBUS communication module from
nameplate designation
Type HW SW
E94AYCPM VB 01.10
To Next Page
Loading...
