Accessories (overview)
Motor holding brake control modules
Motor holding brake control module E94AZHX0051
8
457
EDS94SPP101 EN 10.2
Terminal data
Terminal X107 Labelling Description
Connection of the motor holding brake
BD1
BD2
+ (Lenze: WH)
− (Lenze: BN)
E94AZHX0051: 24 V DC, max. 2.5 A
Observe correct polarity!
+ / − Supply voltage for the motor holding brake (18 ... 30 V DC)
Observe correct polarity!
SSP940X107
Note!
The supply terminals (+/−) are protected against polarity reversal.
The supply status can be reported to the basic device via the error channel.
Further information can be obtained from the documentation of the basic
device.
Terminal data
Conductor cross−section Tightening torque
[mm
2
] [AWG] [Nm] [lb−in]
Single core
0.25 ... 2.5
24 ... 12
0.5 ... 0.6 4.4 ... 5.3
2 conductors
1)
0.25 ... 1.5 24 ... 16
1)
Two conductors of the same cross−section with a twin wire end ferrule
To Next Page
Loading...
