Accessories (overview)
Accessories for diagnostics
Keypad
8
506
EDS94SPP101 EN 10.2
Dismounting
E94AZKAE060
Commissioning steps
Commissioning step Comment
1. Connect keypad to the diagnostic interface. You can also connect or remove the keypad during
operation.
2. If the keypad is supplied with voltage, it carries out
a short self test.
3. The keypad is ready for operation if it displays the
main menu.
If you commission the keypad for the first time, you
are requested to select the dialog language.
4. You can now communicate with the basic device.
E94AZKAE003
To Next Page
Loading...
