EasyManua.ls Logo

Lenze L-force 9400

Lenze L-force 9400
646 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessories (overview)
Filters
RFI filters for single−axis controllers E94AZRSxxxx (4 ... 29 A)
8
571
EDS94SPP101 EN 10.2
Safety instructions for the installation according to UL/CSA
Original − English
Warnings!
Conditions of Acceptability:
ƒ The products covered by this report are only intended for use with Power
Conversion Equipment (inverters).
ƒ Consideration shall be given to the field wiring leads. No strain relief test
was performed on the leads.
ƒ The devices in this report are only evaluated for factory wiring use.
ƒ Temperature tests were performed with hook mounted drive.
Warnings!
Conditions of Acceptability:
ƒ The products covered by this report are only intended for use with Power
Conversion Equipment (inverters).
ƒ Consideration shall be given to the field wiring leads. No strain relief test
was performed on the leads.
ƒ The devices in this report are only evaluated for factory wiring use.
ƒ Temperature tests were performed with hook mounted drive.
ƒ Reactor model E94AZR0544 shall be installed with input wiring of 4 AWG
minimum. Reactor model E94AZR0954 shall be installed with input wiring
of 1/0 AWG minimum.

Table of Contents

Other manuals for Lenze L-force 9400

Related product manuals