Single−axis controllers
Rated data
Operation with rated mains voltage 480 V
3
59
EDS94SPP101 EN 10.2
Sinusoidal filter assignments changed for this operating mode:
Max. motor cable lengths for compliance with the conducted interference emission according to C2 when
sinusoidal filters and line filters are used
Type
Setting C01199 Sine filter shielded
unshielded
Switching
frequency
E94BSxE2924 "Mode 1" EZS3−480A200 150 m
− m
2 kHz
or
4 kHz
The selection "Mode 2 is only permissible for mains voltages 440 V.
To Next Page
Loading...
