Accessories (overview)
Filters
RFI filters for power supply modules E94AZRPxxxx (82 ... 200 A)
8
596
EDS94SPP101 EN 10.2
Mains
Terminal X301 Labelling Description
L1
L2
L3
PE
Connection of mains phases L1, L2, L3 and PE conductor
SSP94NF306
Terminal data
Max. conductor cross−section Tightening torque
[mm
2
] [AWG] [Nm] [lb−in]
E94AZxP0824
Connection with M8
ring cable lug
70
(2 x 70)
2/0 12 106 SW13
E94AZxP2004
Connection with M10
ring cable lug
150
(2 x 120)
250 mcm 20 177 SW15
Standard device
Cable X302 Labelling Description
L1’
L2’
L3’
Filter output conductor (lead with ring cable lug, colour BK)
Output PE conductor (lead with ring cable lug, colour GN/YE)
SSP94NF307
Safety instructions for the installation according to UL/CSA
Original − English
Warnings!
Conditions of Acceptability:
ƒ The products covered by this report are only intended for use with Power
Conversion Equipment (inverters).
ƒ Consideration shall be given to the field wiring leads. No strain relief test
was performed on the leads.
ƒ The devices in this report are only evaluated for factory wiring use.
ƒ Temperature tests were performed with hook mounted drive.
To Next Page
Loading...
