Accessories (overview)
Filters
Sinusoidal filters EZS3−xxxA200 4 ... 90 A
8
604
EDS94SPP101 EN 10.2
Terminal data
Sinusoidal filter
Terminal PE screw
Connection cross−sections Tightening torque Tightening torque
[mm
2
] [AWG] [Nm] [lb−in] [Nm] [lb−in]
EZS3−004A200
0.2 ... 6
24 ... 10 0.6 5.3
M4 2 17.7
EZS3−010A200
EZS3−017A200 0.5 ... 16 20 ... 6 1.5 13.3
EZS3−024A200
2.5 ... 25 10 ... 6 2 17.7
M5 3 26.5
EZS3−032A200
EZS3−037A200
EZS3−048A200
2.5 ... 35 12 ... 2
3 26.5
EZS3−061A200
EZS3−072A200
16 ... 50 1/0 ... 6
EZS3−090A200
Safety instructions for the installation according to UL/CSA
Original − English
Warnings!
Conditions of Acceptability:
ƒ The products covered by this report are only intended for use with Power
Conversion Equipment (inverters).
ƒ Appropriate cooling measures shall be taken based on the power loss data
within the instructions available from the manufacturer.
ƒ External wiring material for models with bus bar screw connectors − R/C
(AVLV2), rated 105 °C min., suitable for applied voltage and current. If wiring
material with a lower temperature rating is used, an additional temperature
test at the wiring material has to be conducted in the end use.
To Next Page
Loading...
