Accessories (overview)
Filters
Sinusoidal filters EZS3−xxxA200 115 ... 150 A
8
610
EDS94SPP101 EN 10.2
Electrical installation
M
3~
1U1
1U2
1V1
1V2
1W1
1W2
EZS3-xxxA200
xxxx
UVW
SSP94SF107 SSP94SF004
Terminal data
Sinusoidal filter
Terminal PE screw
Connection cross−sections Tightening torque Tightening torque
[mm
2
] [AWG] [Nm] [lb−in] [Nm] [lb−in]
EZS3−115A200
35 ... 95
4/0 ... 2 6 53.1 M8 18 159.3
EZS3−150A200
Safety instructions for the installation according to UL/CSA
Original − English
Warnings!
Conditions of Acceptability:
ƒ The products covered by this report are only intended for use with Power
Conversion Equipment (inverters).
ƒ Appropriate cooling measures shall be taken based on the power loss data
within the instructions available from the manufacturer.
ƒ External wiring material for models with bus bar screw connectors − R/C
(AVLV2), rated 105 °C min., suitable for applied voltage and current. If wiring
material with a lower temperature rating is used, an additional temperature
test at the wiring material has to be conducted in the end use.
To Next Page
Loading...
