Description ODSL 30
16 ODSL 30 Leuze electronic
Notice
With the help of the two aiming notches on the upper side of the device, you can carry out a
coarse alignment of the ODSL 30 even before commissioning.
3.4 ODSL 30 Variants
Model variations
The ODSL 30 is available in four variants:
•as a laser distance sensor with 2 analogue outputs 1 … 10V and 4 … 20mA
and 1 universally configurable switching output
measurement range between 0.2 … 30m
•as a laser distance sensor with 3 universally configurable switching outputs
measurement range between 0.2 … 30m
•as a laser distance sensor with serial interface RS 232
and 2 universally configurable switching outputs,
measurement range between 0.2 … 30m
•as a laser distance sensor with serial interface RS 485/RS 422
and 2 universally configurable switching outputs,
measurement range between 0.2 … 30m
To Next Page
Loading...
