Leuze electronic ODSL 30 Series - Odsl 30;D 485-30 M-S12

Technical Data ODSL 30
56 ODSL 30 Leuze electronic
4.2.4 ODSL 30/D 485-30M-S12
ODSL 30/D 485-30M-S12
Electrical data
Operating voltage U
B
1)
1) For UL applications: only for use in "Class 2" electrical circuits according to NEC
10 … 30VDC (incl. residual ripple)
Residual ripple  15% of U
B
Power consumption  4W
Switching outputs
2)
2) LC display and keypad at the device for configuration
2 PNP transistor outputs, HIGH active (default),
NPN transistor or push-pull through configuration
Signal voltage high/low  (U
B
- 2V) /  2V
Output current max. 100mA
per transistor output
Serial interface RS 485, 9600 Baud (default), no termination,
baud rate configurable
Transmission protocol see chapter 3.4.3
Error limits
3)
3) In the temperature range of 0°C … +45°C, measurement object  50x50mm²;
at temperatures < 0°C different error limits apply;
Absolute measurement
accuracy
4)
4) Diffuse reflectance 6% … 90%, temperature range 0°C … +45°C
±5mm (6 … 90% diffuse reflection),
±2mm (90% diffuse reflection) after referencing
Repeatability
5)
5) Same object, identical environmental conditions
± 2mm (6 … 90% diffuse reflection)