Software
68 ODSL 30 Leuze electronic
7.3.1 Description of the Menu Commands
Menu item "File"
Under menu item File you can switch to configuration mode or quit the program.
Menu item "Type!"
The menu item Type! is used for the default setting of parameters and the generation of
configuration files without an ODS being connected. It lets you choose a device variant that
you wish to configure.
Menu item "Options"
The following three possibilities are offered under Options:
• Language selection to choose the language for dialog.
• Interface to choose the port to which the cable to the ODSL 30 is connected
(standard: COM 1). The configuration software automatically recognizes the interface
used. Choosing a different port could become necessary if more than one sensor is
connected.
• Change password: first enter your old, then your new password and confirm with
OK.
Menu item "?"
Choose About…, for information on ODS 96 configuration software (product, program,
device version, as well as for the address of Leuze electronic).
To Next Page
Loading...
